Specifications
Pvc edge band
Plastic Machine 1.ce certificate.
2.germany quality with professional technique
3.rich expereience for 20 years
Turn key project PVC edge banding production line
1. Company introduction
Qingdao Weier
Plastic Machinery company is one professional manufacture that involved in production of polymer science and plastics machinery and equipment. Our company is the pilot plant base of science and technology Institute of plastics engineering and industrialization of Qingdao University, and is the WPC industrialization base of Qingdao bio-energy and process Institute of Chinese Academy science; and is national WPC Director unit, and is the Executive Director unit of Modification plastic Association of China Committee. Combined together with many polymer profession and university strength chemical engineering , our company has developed wide range of equipment for domestic need plastic, Meanwhile by introducing and absorbing foreign advanced plastic machines and process technology , we have realized one stop service of process machinery
2. Whole process for PVC single edge banding production:
Extrusion Line ( including
Single Screw Extruder—mold—embossing—cooling—haul off—glueing—coling)---surface finish ( three roller printing OR heat transfer for customers’ choice) 3. Detailed configuration of equipment
3.1 SJ-65/25 single screw Extruder |
Screw |
Raw material | 38CrMoAIA |
Hardness treatment | Nitriding 0.4-0.7mm |
Hardness | HV900-1000 |
Brittle nitride | ≤ first grade |
Surface roughness | Ra0.4um |
Diameter | 65mm |
(L/D) | 25:1 |
Type | For PVC exclusive use |
Barrel |
Raw material | 38CrMoAIA |
Hardness treatment | Nitriding 0.4-0.7mm |
Hardness | HV900-1000 |
Brittle nitride | ≤ first grade |
Inner surface roughness | Ra0.4um |
heating ,cooling |
Heating mode | Cast aluminum heater |
Heating section | 6 sections (6 sections for keyboard design) |
Heating power | About 16kw |
Cooling mode | Air cooling |
Cooling power | 180Wx3 |
Reduction gearbox |
Material of box | HT200 |
Wheel gear | 20CrMnTi |
Wheel gear hardness treatment | Under carburization, quenching and gear grinding treatment |
Gear surface hardness | HRC50-55 |
Gear wheel fineness | GB10095-88.6 grade |
Master motor |
power | 18.5kw |
Rotating speed(r/min) | 1440 |
Discharge outlet center cooling |
Cooling form | Water cooling |
mode | Inner circulation |
3.2 Mould |
material | 40Cr |
Heating mode | External heating, cast aluminum heater |
3.3 Embossing device ( emboss roll will be ordered be customers’ requirement, about 500 USD around) |
3.4 Cooling tank |
Raw material | Stainless steel |
Cooling way | Spray |
Tank length | 3000 |
Dry blowing system | 1set |
3.5 Haul-off (with metering system) |
type | Glue roll |
Effective length | |
Clamp way | Hand wheel clamp |
Driving way | Motor drive |
Power | 0.75KW |
Back coating system |
Type | Roller coating |
3.6 Glueing device |
3.7 Coiling machine |
Transmission system | Torque motor |
3.8 Electric appliances |
Frequency Inverter | TECO inverter |
Voltage permissible range | ±15% |
Temperature controlling meter | PID temperature controlling |
Temperature components | Platinum thermocouple |
Circuit breaker contactor | Siemens electrical appliances |
Relay electric appliances | Japan OMRON |
Button/ led | French TE |
4. Payment term: 1)30% of total amount paid by TT as advance, then the seller start production 2)after the machine is finished ,buyer come to test the machine in seller’s factory , and then pay the 70% balance by TT or irrevocable L/C at sight , then seller ship the machine 5. after-sale service and technology: (1)the supplier provide service manual and maintenance instruction of main electric appliance,limb,usage manual of equipment.We also supply water,electricity,gas of equipment and installation drawing. (2)the supplier is responsible for installation,debugging and training, but the air tickets, insurance,eating,housing and every day 50 USD for each engineer will be borned by the buyers. we will realize guarantee of repair; replacement and refund of substandard products within one year after the machine leaves factory. And half a year for electric parts . Fittings of the machine will be supplied at preferential price after one year . “Excellent Quality and Reasonable Price” is our company’s quality policy; "Honest Service and Win-win Cooperation” is our company’s core concept. we offer turn key project, with lifelong after sale service! we have ready machines in factory for your test and visit! sincerely welcome all friends to visit our factory! Contact: Tina Cell phone 0086-15253278285 Skype: tina-supermachine
Contact us if you need more details on Pvc Edge Banding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Shrink Band Machine、Pvc Edge Banding
Production Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : PVC Edge Band Machine